Full-service kitchens pairing speed with consistency often land on Hobart's CL44e - CL44e Conveyor Dishwasher rated heavy duty with 195 racks/hr on the published sheet.
Spec blocks list 44 in width, 25 in depth, 78 in height, and about 510 lb weight. Electric service (17 kW) pairs with Conveyor type on the same document set used here.
Before purchase, verify 208V/3ph, drain or vent paths (where applicable), and that replacement parts for CL44e are available through your dealer channel. Manufacturer pages remain the authority if field conditions differ.
Metrics
| Width | 44 in |
|---|---|
| Depth | 25 in |
| Weight | 510 lb |
| Height | 78 in |
| Electric Power | 17 kW |
Descriptors
| Brand | Hobart |
|---|---|
| Power Type | Electric |
| Duty Class | Heavy |
| Form Factor | Floor |
| Capacity Class | High-volume |
| Dimensions | 44 × 25 × 78 in |
| Capacity | 195 racks/hr |
| Voltage / Phase | 208V/3ph |
| Construction | Conveyor type |
| Temperature Range | 180 °F rinse |
| Warranty Term | 1 year parts |
| Included Accessories | Conveyor belt |
Frequently asked questions
What capacity is listed for the Hobart CL44e?
The published capacity string for this catalog row is 195 racks/hr. Confirm against the current Hobart spec PDF because optional configurations can change oil, bowl, or pan ratings. Confirm Spec sheets and Published figures against the attributes shown on this page before ordering.
What power and voltage does the CL44e require?
This record shows Electric service with 17 kW and 208V/3ph. Electric models need verified phase and amperage at the disconnect; gas models need listed BTU and gas type matching the rough-in.
Is the Hobart CL44e a floor or counter unit?
Form factor is recorded as Floor for Hobart CL44e Conveyor Dishwasher. Use the width and depth attributes with your floor plan before ordering, especially when placing the unit under hoods or near aisle traffic.