Hobart EDGE13-9 Automatic Slicer

meat slicersUnited States
Last updated:

Part / Model Number: EDGE13-9

Hobart EDGE13-9 Automatic Slicer is a floor commercial unit listed at 13 in blade, with typed width, depth, weight, and power fields for catalog compare. Specs are sourced from the manufacturer public sheet dated 2026-07-24.

Photograph of the Hobart EDGE13-9 Automatic Slicer, cataloged as a meat slicers.
Hobart EDGE13-9 Automatic Slicer · hobart-edge13-9 · Troy, Ohio, United States · 40.0395, -84.2033 · united-states · ohio · troy

Full-service kitchens pairing speed with consistency often land on Hobart's EDGE13-9 - EDGE13-9 Automatic Slicer rated heavy duty with 13 in blade on the published sheet.

Spec blocks list 26 in width, 34 in depth, 26 in height, and about 78 lb weight. Electric service (1 HP) pairs with Stainless carriage on the same document set used here.

Before purchase, verify 120V/1ph, drain or vent paths (where applicable), and that replacement parts for EDGE13-9 are available through your dealer channel. Manufacturer pages remain the authority if field conditions differ.

Metrics

Width26 in
Depth34 in
Weight78 lb
Height26 in
Motor Power1 HP

Descriptors

BrandHobart
Power TypeElectric
Duty ClassHeavy
Form FactorFloor
Capacity ClassStandard
Dimensions26 × 34 × 26 in
Capacity13 in blade
Voltage / Phase120V/1ph
ConstructionStainless carriage
Temperature RangeN/A
Warranty Term1 year parts
Included AccessoriesAutomatic carriage

Frequently asked questions

What capacity is listed for the Hobart EDGE13-9?

The published capacity string for this catalog row is 13 in blade. Confirm against the current Hobart spec PDF because optional configurations can change oil, bowl, or pan ratings. Confirm Spec sheets and Published figures against the attributes shown on this page before ordering.

What power and voltage does the EDGE13-9 require?

This record shows Electric service with 1 HP and 120V/1ph. Electric models need verified phase and amperage at the disconnect; gas models need listed BTU and gas type matching the rough-in.

Is the Hobart EDGE13-9 a floor or counter unit?

Form factor is recorded as Floor for Hobart EDGE13-9 Automatic Slicer. Use the width and depth attributes with your floor plan before ordering, especially when placing the unit under hoods or near aisle traffic.

Related in this catalog

  • Hobart HS12 Manual Meat Slicer

    Hobart HS12 Manual Meat Slicer

    Part / Model Number: HS12

    Hobart HS12 Manual Meat Slicer is a countertop commercial unit listed at 12 in blade, with typed width, depth, weight, and power fields for catalog compare. Specs are sourced from the manufacturer public sheet dated 2026-07-24.

    meat-slicers
  • Berkel 827A-PLUS Gravity Feed Slicer

    Berkel 827A-PLUS Gravity Feed Slicer

    Part / Model Number: 827A-PLUS

    Berkel 827A-PLUS Gravity Feed Slicer is a countertop commercial unit listed at 9 in blade, with typed width, depth, weight, and power fields for catalog compare. Specs are sourced from the manufacturer public sheet dated 2026-07-24.

    meat-slicers
  • Hobart HS9 Manual Meat Slicer

    Hobart HS9 Manual Meat Slicer

    Part / Model Number: HS9

    Hobart HS9 Manual Meat Slicer is a countertop commercial unit listed at 9 in blade, with typed width, depth, weight, and power fields for catalog compare. Specs are sourced from the manufacturer public sheet dated 2026-07-24. Line cooks notice when a unit blocks the aisle during service.

    meat-slicers
  • Berkel B33-PLUS Manual Slicer

    Berkel B33-PLUS Manual Slicer

    Part / Model Number: B33-PLUS

    Berkel B33-PLUS Manual Slicer is a countertop commercial unit listed at 12 in blade, with typed width, depth, weight, and power fields for catalog compare. Specs are sourced from the manufacturer public sheet dated 2026-07-24.

    meat-slicers
Clear